Find genuine replacement parts and accessories for Hygeia Evolve and FIT Pro breast pumps. Designed to maintain hospital-grade performance, comfort, and hygiene so your pumping routine stays smooth, reliable, and stress-free.
Express/FIT Pro/Evolve 3 Piece Backflow Protector (2ct)
Express/FIT Pro/Evolve Milk Storage Containers 4 oz. (2ct)
Duckbill valves are the highest-frequency replacement item — plan on replacing them every 4 to 8 weeks if you're pumping daily. Backflow protector diaphragms follow at every 1 to 3 months. Tubing typically lasts 3 to 6 months. Structural parts like locking rings, discs, and flange bases last much longer and are replaced on condition rather than a schedule. The Nipple Measuring Tool and storage containers don't have a replacement cycle.
The clearest sign is a noticeable drop in suction with no other change. You can also test directly: remove the valves, hold them up to a light, and gently pull the petals apart. Healthy valves spring back immediately and completely. Worn valves either stay partially open or close sluggishly. If there's any visible tearing, white spots, or stickiness, replace immediately. Duckbill Valves (2ct) — $12.99.
Moisture inside tubing almost always indicates backflow protector failure — milk or water vapor has moved past the diaphragm and into the tube. Stop using the pump immediately, inspect the backflow protector for damage, and replace both the backflow protector and the tubing before continuing. Never attempt to dry or reuse tubing that has had moisture inside it — mould grows rapidly in pump tubing.
The process is the same as with any pump measure your nipple diameter in millimeters (nipple only, not the areola) and add 2 to 4mm. The One-Hand pump includes 24mm and 28mm funnels. The Two-Hand pump includes 27mm and 29mm flanges. If you're between sizes or unsure, visit the Flange Sizing Guide for a full walkthrough, or connect with an IBCLC through the Hygeia Baby App for a personal fit assessment.
Yes — the duckbill valves, backflow protectors, tubing, flange bases, locking rings, locking discs, storage containers, and all flange funnels in this collection are compatible with both the Hygeia FIT Pro and Hygeia Evolve pump systems. Many parts are also cross-compatible with the Hygeia Express — the product name on each listing confirms which pumps it fits.
The flange base is the rigid housing that connects to the pump tubing and holds the assembly together. The flange funnel sits inside the base and is the part that actually contacts your breast — it's the tunnel that your nipple draws into during expression. The funnel is size-specific to your nipple measurement; the base is the same across all funnel sizes. If you're switching to a different funnel size, you don't need a new base unless yours is damaged.
Nipple shields are not required for standard pumping — they're a specialised tool for specific situations. Use cases include: flat or inverted nipples that make latching difficult, significant nipple soreness in the early postpartum period, or large nipple-to-flange size gaps that create contact issues. They're available in 15mm and 21mm. If you're unsure whether a nipple shield is right for your situation, an IBCLC session through the Hygeia Baby App can help you make that decision with professional guidance.
Measure your nipple diameter in millimeters at the base of the nipple — not including the areola. Add 2 to 4mm to that measurement to get your starting funnel size. Hygeia carries sizes from 10mm to 32mm, so you can get a precise fit regardless of nipple size. For a full step-by-step guide, visit the Flange Sizing Guide. If you want a personalized assessment, book a 1:1 session with a certified IBCLC through the Hygeia Baby App via the Lactation Assistance page.
Several parts in this collection — including duckbill valves, backflow protectors, tubing, locking rings, locking discs, and flange funnels — are cross-compatible with the Hygeia Express. Each product listing confirms compatible models in the title (e.g., 'Express/FIT Pro/Evolve'). For Express-specific wearable parts like flange inserts and cup assemblies, see the dedicated Express Accessories & Parts collection.
Rinse all parts that contact milk immediately after each session under cold water to prevent residue from drying. Then wash with warm soapy water, rinse thoroughly, and air dry on a clean cloth or drying rack — never towel dry as this transfers lint and bacteria. For sterilization, most Hygeia parts are suitable for steam sterilization bags or a dishwasher top rack. Never submerge or rinse the tubing — if moisture gets inside, replace it immediately. Replace parts on schedule regardless of visual condition, as silicone degrades before it visibly shows wear.
Start with the Troubleshooting guide which covers the most common performance issues and their part-level causes. For pump-specific assembly and parts identification, the Instruction Manuals and Instruction Videos walk through each component visually. For questions about fit, supply, or how parts affect pumping technique, the Hygeia Baby App connects you with IBCLC lactation consultants who can advise on part selection alongside pumping support — visit the Lactation Assistance page to get started.
Breast pump parts wear out. That's not a flaw — it's how the system is designed to work. Silicone duckbill valves lose their elasticity after weeks of daily compression. Backflow protector diaphragms degrade with repeated sterilization. Tubing gets micro-cracks that affect suction pressure. And flanges that fit perfectly at two weeks postpartum may feel different as your body changes.
The difference between a pump that performs at the same level for two years and one that seems to lose suction after a few months almost always comes down to parts maintenance. Fresh valves, clean tubing, and properly fitting flanges are what keep a hospital-grade pump performing at hospital-grade standards.
This collection covers every genuine replacement part and accessory for the Hygeia FIT Pro and the Hygeia Evolve pump systems — 29 products across six categories: wear parts, structural components, flange funnels in 13 sizes (10mm through 32mm), nipple shields, storage, and power supply. All parts are genuine Hygeia replacements, made to the same BPA-free, phthalate-free standards as the pumps themselves, and compatible with the full Evolve and FIT Pro range.
All 29 products are organized by category. Prices and compatibility confirmed from the live product pages.
These parts directly create or protect suction. They degrade with normal use and are the most common cause of reduced pump performance.
| Product | Price | Replacement Frequency | Compatible With |
|---|---|---|---|
| Duckbill Valves (2ct) | $12.99 | Every 4–8 weeks | FIT Pro, Evolve, Express |
| 3-Piece Backflow Protector (2ct) | $14.99 | Every 1–3 months | FIT Pro, Evolve, Express |
| Tubing (2ct) | $19.99 | Every 3–6 months | FIT Pro, Evolve, Express |
These parts form the pump assembly. They last longer than wear parts but should be replaced if cracked, warped, or no longer sealing properly.
| Product | Price | Replacement Trigger | Compatible With |
|---|---|---|---|
| Flange Bases (2ct) | $12.99 | When cracked/warped | FIT Pro, Evolve, Express |
| Locking Rings (2ct) | $6.50 | When loose/damaged | FIT Pro, Evolve, Express |
| Locking Discs (2ct) | $6.50 | When loose/damaged | FIT Pro, Evolve, Express |
Flange funnels insert into the flange base and determine the size of the opening that fits around your nipple. Hygeia carries the most complete size range available in a single accessory store — from the smallest 10mm up to the XL 32mm — which means moms with very small or very large nipple diameters can get an accurate fit without adapters or workarounds.
Use the Flange Sizing Guide to measure correctly before ordering. Getting this right matters more than any other part choice.
| Product | Price | Replacement Trigger | Compatible With |
|---|---|---|---|
| 10mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 11mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 12mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 13mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 15mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 17mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 19mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 21mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 24mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 27mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 28mm Flange Funnels (2pk) | $12.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 30mm Flange Funnel (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
| 32mm Flange Funnel XL (Single) | $6.99 | Replace when cracked, discoloured, or poor fit | FIT Pro, Evolve, Express |
Nipple shields are thin silicone covers that fit over the nipple during pumping or nursing. They're primarily used when direct latch is difficult due to flat or inverted nipples, nipple soreness, or a significant size difference between nipple and flange. Available in 15mm and 21mm.
| Product | Price | Notes |
|---|---|---|
| Nipple Shield 15mm (2ct) | $13.99 | For flat/inverted nipples or latch difficulty |
| Nipple Shield 21mm (2ct) | $13.99 | Standard size — most common starting point |
| Product | Price | Notes |
|---|---|---|
| Milk Storage Containers 4 oz (2ct) | $12.99 | BPA-free, compatible with all Hygeia pumps |
| FIT Pro Power Supply | $29.99 | USB-C charging adapter — FIT Pro only |
| Nipple Measuring Tool | $12.00 | For accurate flange sizing — currently sold out |
Suction loss is the clearest sign something needs replacing — but catching wear earlier keeps your pump working consistently rather than reacting to performance drops mid-session. Here's the replacement timeline for each part category.
Duckbill valves are the single most common reason a pump starts underperforming. The silicone petals that create the one-way seal lose elasticity from repeated compression and sterilization, and milk residue accelerates degradation even with thorough cleaning. Most moms who pump daily should plan on replacing valves once a month as standard practice — not when suction visibly drops, but as a scheduled maintenance step.
If your pump suddenly feels weaker and nothing else changed, check the valves first. Pull the petals apart gently — if they don't spring back immediately, they've lost their seal. Replace valves here.
The 3-piece backflow protector (housing, silicone diaphragm, and cap) prevents milk from traveling back toward the pump motor. The silicone diaphragm is the critical component — it creates the membrane seal. Inspect it monthly for cloudiness, tackiness, tears, or any visible deformation. If it doesn't sit flat in the housing or shows any surface breakdown, replace the set. Keeping milk out of the tubing and motor depends on this part functioning correctly.
Also replace the full set if you've had any instance of visible moisture inside the tubing — that indicates the diaphragm has already failed. Backflow Protector (2ct) — $14.99 .
Tubing carries the pressure from the motor to the flange assembly. Micro-cracks, cloudiness, and any yellow discolouration reduce pressure efficiency and create hygiene risks. Check tubing monthly — hold it up to a light source and look for cracks, particularly at the connector ends where stress concentrates. If you notice condensation inside the tubing during sessions, that's a sign of backflow protector failure rather than the tubing itself, but inspect both when it happens.
Never try to rinse or wash tubing — moisture inside tubing causes mould. If condensation appears, replace it immediately. Replacement Tubing (2ct) — $19.99..
Flanges don't have a fixed replacement cycle — they're replaced when your fit changes or when the funnel shows visible damage. Your nipple size can shift during early postpartum weeks, at different phases of the pumping day, and as your supply establishes. If you start noticing nipple redness, a white ring around the base of your nipple after pumping, or reduced output despite strong motor function, re-measure and order the correct size from the full range.
Flange funnels that are cracked, have visible stress marks at the neck, or no longer seat firmly in the flange base should be replaced regardless of fit. Hygeia carries 13 sizes from 10mm to 32mm — the widest range available in a single store.
Locking rings and discs secure the flange assembly and bottle connection. They don't wear on a schedule but should be checked every few months for hairline cracks or stripped threads. If any part of the assembly feels loose during a session, inspect these components first. Locking Rings (2ct) — $6.50 | Locking Discs (2ct) — $6.50.
Flange size is the most overlooked factor in pumping output, and it's probably the most important one. A flange that's too small compresses the nipple canal and restricts milk flow. One that's too large pulls in too much areola tissue, creating friction and reducing suction efficiency. In both cases the result is the same: less milk per session, more discomfort, and a pump that appears to be underperforming when the real issue is fit.
The standard guidance is to measure your nipple diameter in millimeters — just the nipple, not the surrounding areola — and add 2 to 4mm. So a 20mm nipple diameter typically needs a 22mm to 24mm funnel. That said, fit also depends on nipple shape, tissue flexibility, and whether the nipple has any swelling during early postpartum weeks, so some adjustment is usually needed.
The Hygeia FIT Pro PAS kit includes 24mm and 28mm flange funnels. These two sizes cover a broad starting range, but 24mm and 28mm are not the only sizes that fit the FIT Pro flange base. All funnel sizes in this collection — from 10mm through 32mm — are compatible with the standard Evolve and FIT Pro flange base assembly.
Single funnels are $6.99. The 28mm size also comes as a 2-pack for $12.99 — useful if you're confident in your size and pump both sides simultaneously. If you're unsure which size to start with, the Flange Sizing Guidewalks through the measurement process, or you can book a 1:1 session with an IBCLC through the Hygeia Baby App for a personalised fit assessment.
